FAQ: How To Assemble A Lifetime Basketball Hoop?

How long does it take to assemble a lifetime basketball hoop?

Assembly: The package was frustration free and easy to sort through. This basketball hoop took me 4 hours to put together. That time included getting my tools out, assembly and clean up.

How do you set up a basketball hoop?

How to Install a Basketball Hoop In-Ground

  1. Step 1: Choose Your Location and Call Before You Dig.
  2. Step 2: Dig a Hole.
  3. Step 3: Pour the Concrete.
  4. Step 4: Raise the Pole.
  5. Step 5: Attach the Backboard.
  6. Step 6: Install the Rim and Net.
  7. Step 7: Finishing Touches.

Does Walmart assemble basketball hoops?

Add Handy Installation or Assembly Services to your cart and check out. Once you’ve purchased your service, you will get an email from Handy that lets you pick your time and date. A professional will complete your project to perfection!

How much does it cost to assemble a portable basketball hoop?

The average cost to assemble a basketball hoop is about $450 for an inground model. That includes both labor and materials. Budget about $50 to $75 for concrete, $150 to $500 for the unit, and the rest for the professional labor installers provide.

You might be interested:  Quick Answer: What Does In The Bonus Mean In Basketball?

How long does a basketball hoop last?

Even the best basketball system will need some attention from time to time. The net will need to be replaced every 1-5 years.

How do you attach a basketball hoop to a garage roof?

If mounting on a roof, locate one of the roof studs (using a stud finder if necessary). Attach the mounting bracket of the backboard to one of those studs. Use a pencil or marker to mark the holes into which you will drill the bolts into the studs.

How big is a basketball hoop box?

The top of the hoop is 10 feet (305 cm) above the ground. Regulation backboards are 6 feet (183 cm) wide by 3.5 feet (107 cm) tall. All basketball rims (hoops) are 18 inches (46 cm) in diameter.

How deep should you dig for a basketball hoop?

Dig A Hole



This will provide stability to your basketball hoop. You can dig by hand with a shovel, or use an auger or other digging equipment. The hole should be 48″ to 50″ (1.2 m – 1.3 m) deep and 16-18″ (0.4 m – 0.5 m).

How many bags of cement do I need for a basketball hoop?

Goalrilla recommends purchasing 12-13 bags of Quikrete concrete mix. This concrete meets the ASTM C387 Standard Specifications for concrete.

How long should concrete cure a basketball hoop?

Allow the concrete to set for at least 72 hours before installing the rest of the system onto the bottom pole. In humid climates or wet weather, allow additional time for the concrete to cure. Do not proceed until the curing process is complete.

Leave a Reply

Your email address will not be published. Required fields are marked *