- 1 How much does it cost to install an in-ground basketball hoop?
- 2 How do you install an in-ground basketball hoop?
- 3 Where should a ground basketball hoop be placed?
- 4 How long does it take to install an inground basketball hoop?
- 5 How deep should you dig for a basketball hoop?
- 6 How long should concrete cure a basketball hoop?
- 7 What is the best in-ground basketball hoop?
- 8 Can you convert a portable basketball system to in-ground?
- 9 Is a 54 inch backboard big enough?
- 10 What kind of cement is used for basketball hoops?
How much does it cost to install an in-ground basketball hoop?
HOW MUCH SHOULD IT COST? Managing the installation yourself has its own merit, but if you’re paying somebody to do it, you should expect professional quality. Professional installations should generally range anywhere from $400 to $600 from beginning to end.
How do you install an in-ground basketball hoop?
How to Install a Basketball Hoop In-Ground
- Step 1: Choose Your Location and Call Before You Dig.
- Step 2: Dig a Hole.
- Step 3: Pour the Concrete.
- Step 4: Raise the Pole.
- Step 5: Attach the Backboard.
- Step 6: Install the Rim and Net.
- Step 7: Finishing Touches.
Where should a ground basketball hoop be placed?
Around 20 feet of paved surface would be a decent amount of room to install a hoop with enough overhang so that you’re not running into the pole while having enough space for a regulation foul shot of 15 ft. Overhang, the distance from the front of the backboard to the front of the pole, should ideally be about 4 feet.
How long does it take to install an inground basketball hoop?
On this visit, the technician will confirm with someone over the age of 18 where the Hoop should be placed. The hole will be dug, anchor kit placed and concrete poured. This visit typically takes about 90 to 120 minutes for a normal dig.
How deep should you dig for a basketball hoop?
Dig A Hole
This will provide stability to your basketball hoop. You can dig by hand with a shovel, or use an auger or other digging equipment. The hole should be 48″ to 50″ (1.2 m – 1.3 m) deep and 16-18″ (0.4 m – 0.5 m).
How long should concrete cure a basketball hoop?
Allow the concrete to set for at least 72 hours before installing the rest of the system onto the bottom pole. In humid climates or wet weather, allow additional time for the concrete to cure. Do not proceed until the curing process is complete.
What is the best in-ground basketball hoop?
The best in-ground basketball hoops for every budget:
|Basketball Hoop||Backboard Size||Backboard Material|
|Spalding NBA System||60 inches||1/4″ Tempered Glass|
|Silverback SB 60||60 inches||5/16″ Tempered Glass|
|Goalrilla GS 54||54 inches||3/8″ Tempered Glass|
|Goalrilla GS 72||72 inches||3/8″ Tempered Glass|
Can you convert a portable basketball system to in-ground?
Changing a portable basketball hoop to an in-ground system is a weekend project that will likely take about 8 hours of actual work time. By doing all of the digging and cement work yourself, which is quite possible for many people, you can significantly decrease the cost of this project.
Is a 54 inch backboard big enough?
Backboard sizes vary in width from 48” wide all the way up to 72”, but for the sake of regular game play we recommend choosing backboard no smaller than 54” wide. Anything narrower than this measurement won’t allow the player to perform bank shots at all!
What kind of cement is used for basketball hoops?
If you have a specific mix you’re looking for, then great, you already know what to get. However, if you’re simply trying to follow the instructions for your hoop, your standard ‘High-Strength’ mix will do just fine. Goalrilla recommends purchasing 12-13 bags of Quikrete concrete mix.